Test Parameters | Specification |
---|---|
Product | Pro Push Button Station |
Degree of Protection | IP 65 |
Safety |
Fully insulated to hose electrical & electronic equipment w.r.t. protection against electric shock. |
Material |
Bottom Cover: Tough, Impact resistant & fire retardant ABS. Top Cover: Tough, Impact resistant & fire retardant ABS. Gasket: Nitrile rubber, which is good resistant to Oil & acids. Screws: Half threaded Self tapping Cold Forged Screws with blacodising. |
Single | 75 x 75 x 56 |
Two | 127 x 75 x 56 |
Three | 160 x 75 x 56 |
Four | 215 x 75 x 70 |
Five | 270 x 75 x 71 |
Eight | NA |
Screw Size for Wall Mounting | M4 mm Insertion of screws directly through base cover. |
Maintenance |
Do not need any particular maintenance. If necessary soap and water can be used for cleaning. If detergent is used, enclosure should be rinsed well clean water. Do not use any solvents to clean the enclosures. |
Temperature Range | Long term exposure to temperatures above 70° C should be avoided. No significant change in impact strength is noticed up to -20° C |
©2023 Esbee. All rights reserved.